Ddns | D-Link DVG-2032S instruction

DDNS

These settings are only necessary when the gateway is set up under a NAT that uses a dynamic IP address and do not support DDNS.

Image 26

D-Link DVG-2032S user manual Ddns

Contents

DVG-2032S Voip Gateway Page Contents Coding Principle Introduction Product Overview Product Features Call features optional Rear Panel Hardware DescriptionFront Panel Network Interface Gateway Assigned with a Public IP Address Gateway in a NAT network Example for DVG-2032S DVG-2032S connecting directly to phone setsTelephone Interface Description Integrating the DVG-2032S with PBX Preparation Basic Settings of a GatewayIVR Interactive Voice Response To inquire about current Gateway’s WAN Port IP address Save SettingsInstructions IVR Functions Table Function Code Description Example Function Code Description Example Subnet Mask Settings Static IP Settings Function Command Select a Static IPIP address Settings Default Gateway Settings PPPoE Account Settings PPPoE Character Conversion Table Network Settings WAN InstructionsPage Setting Static IP IP Configuration Setting WAN PortSetting Dynamic IP Dhcp Adsl PPPoE Settings Clone MAC DNS SettingsBigPond for Australia use only Using Phone Books Manager LAN IP/Subnet mask Network Settings LANLAN interface mode※ QoS Settings WAN QoS NAT/DDNS NAT Traversal Ddns Telephony Settings Hotline Functions SIP 164 System FXS Representative number registers to Proxy Each line registers to Proxy independently Calling Features Calling Feature Instructions Advanced Options Line Settings Codec Fax Settings Drop Silent Call Timeout Set the time to hang up the phone Speed Dial Digit MapPhone Book Caller Filter ACL for Management Language CDR SettingsCPT/Cadence Settings System Information Ping Test RTP Packet SummaryStun Inquiry Backup/Restore Snmp Provision Settings System Operations Save Settings Software Upgrade Logout IP Sharing Functions Select TCP/IP, and then click Properties Page Instruction Dialed Number Processing Flow End