3
Hardware Description
Front Panel
Power Indicator: Green light indicates a normal power supply.
Run Indicator: Blinking green light indicates normal operation.
Alarm Indicator: When the system starts up, the red light will blink. It also indicates the gateway’s abnormal operation.
P1 – P32 stands for Port 1 – Port 32: Connect to your analog telephone. WAN stands for the WAN Port Indicator.
LAN stands for the LAN Port Indicator.
When starting up the system, the Alarm, Run, and Power indicators will light up. After about 40 seconds, the Alarm indicator will go off, the Run indicator will blink in green, and the Power indicator will stay green under normal operational conditions. If the Alarm indicator continues to blink, it means the system is currently communicating with ISP and has yet to obtain an IP address.
When the WAN is connected, the WAN indicator will light up in green and if data is being transmitted over the Internet, the indicator blinks in green and orange.
Rear Panel
NOTE: Do not connect Phone ports to each other. Also, do not connect any Phone ports directly to a PSTN line or internal PBX. If any of these are done, your
Restore to factory default: (IP address, User’s. Name and Password)
(1)Pull off the power plug.
(2)Press reset (do not let go of the reset button).
(3)Plug the plug back into the socket (do not let go of the reset button).
(4)Let go of the reset button after 6 seconds. Factory settings will be restored.
