Daewoo DRHT-630 manual Connecting an Amplifier/Receiver, Connecting Optional Equipment

0202DRHT-630 2007.2.2 9:19 AM ˘ ` 18

Connections

Connecting an Amplifier/Receiver

Connecting to an amplifier equipped with two channel analogue stereo or Dolby Pro Logic ll/Pro Logic

Connect the Left and Right AUDIO OUT jacks on the DVB-T HDD/DVD Recorder to the left and right audio in jacks on your amplifier, receiver, or stereo system, using the audio cables (A) (Audio cables are not supplied with this product).

The DVB-T HDD/DVD Recorder does not perform internal (2- channel) decoding of DTS sound tracks. To enjoy DTS multi-channel surround, you must connect the DVB-T HDD/DVD Recorder to a DTS compatible receiver via one of the DVB-T HDD/DVD Recorder’s digital audio outputs.

Connecting to an amplifier equipped with two channel digital stereo (PCM) or to an Audio/Video receiver equipped with a multi-channel decoder (Dolby Digital™, MPEG 2, or DTS)

1Connect the DVB-T HDD/DVD Recorder’s DIGITAL AUDIO OUT jack (Coaxial or Optical) to the corresponding in jack on your amplifier. Use an optional digital coaxial (or optical) audio cable. (X)

2You need to activate the DVB-T HDD/DVD Recorder’s digital output; see ‘Digital Audio’ Settings on page 31.

Digital Multi-Channel Sound

A digital multi-channel connection provides the best sound quality. For this you need a multi-channel audio/video receiver that supports one or more of the audio formats provided by your DVB-T HDD/DVD Recorder (MPEG 2, Dolby Digital, and DTS). Check the receiver manual and the logos on the front of the receiver.

•Due to the DTS Licensing agreement, the digital output will be in DTS digital out when the DTS audio stream is selected.

•If the audio format of the digital output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all.

•5.1 channel digital surround sound via the digital connection can only be obtained if your receiver is equipped with a digital multi- channel decoder.

•To see the audio format of the current DVD on the on-screen display, press [AUDIO].

Rear of DVB-T HDD/DVD Recorder

Amplifier (Receiver)

Connecting Optional Equipment

To receive audio/video signals from other equipment, connect the AVF (Audio/Video Front) jacks on the DVB-T HDD/DVD Recorder to the audio/video out jacks on your external component, using optional audio/video cables.

Jack Panel of Accessory Component

(VCR, Analogue Camcorder, etc.)

1

Front of DVB-T HDD/DVD Recorder

18