Daewoo DRHT-630 manual Initial Installation, Re-Installation

0202DRHT-630 2007.2.2 9:19 AM ˘ ` 20

Initial Installation

After successfully connecting your DVB-T HDD/DVD Recorder to your TV and other devices, this chapter will show you how to complete the initial installation.

You must follow the initial installation process to set the time, date, channels, and language preferences for the DVB-T HDD/DVD Recorder.

1Switch on your DVD recorder. An ‘Auto Tune’ message is displayed on the screen. Press [RED] button to start auto tune.

2The DVB-T HDD/DVD Recorder detects channels automatically and stores them in the memory.

3After finishing Auto Channel Search, save the settings by pressing [GREEN] button.

4If you cancel the process during Initial Installation, you should repeat this procedure.

Re-Installation

1Press [SETUP] and select the 'Restore Default Settings' using [œ /√]. Then select ‘YES’ to reset the set (see page 36).

2Power On, then you will see the 'Initial Installation'.

3Repeat the steps 1~3 opposite.

20