MESSAGE DISPLAYS
On systems with two message displays, Switch 1(SW1) will toggle between the speed message displays and Switch 2(SW2) will toggle between the tach message displays.
On systems with one message display, SW1 will either switch from the tach message to the speed message and then toggle to the next speed message with each press and release. SW2 will switch from the speed message to the tach message and then toggle to the next tach message with each press and release.
Speed message displays | DESCRIPTION | . |
|
ODOMTR | odometer mileage |
|
|
TRIP A | trip A odometer mileage |
|
|
TRIP B | trip B odometer mileage |
|
|
SERVIC (when enabled) | miles since last service | ||
|
| ||
HI SPD | high speed recall |
|
|
QUARTR | ¼ mile time in seconds |
|
|
QT SPD | end of ¼ mile speed |
|
|
KPH XXX | kph conversion (or mph conversion if kph selected as primary unit) | ||
NOTE: In normal operation you have to use switch 1 (SW1) to reset trip meters, service counter, and the various performance timers. A press and hold will zero the current reading, if it can be reset.
Tach Message displays | DESCRIPTION | . |
|
HI RPM | high rpm recall |
|
|
HOURS | hours system has been on with tach signal | ||
BAR (on systems with no bar graph) | bar tach readout on message display | ||
RPM (on systems with no digital tach) | digital tach readout on message display |
|
|
TACH (on systems with no digital tach) | digital tach readout on speed display |
|
|
ENGINE | check engine indicator |
|
|
BRAKE | brake warning indicator |
|
|
4W DRV | 4 wheel drive indication |
|
|
WAIT | diesel wait to start indicator |
|
|
GEAR( with optional | gear shift position indicator |
|
|
Future BIM modules | BIM messages will display on tach message display | ||
NOTE: In normal operation you have to use switch 2 (SW2) to reset hour meter, and high RPM recall. A press and hold will zero the current reading, if it can be reset. A press hold will also clear warning messages such as ENGINE, BRAKE, etc.
6 | MAN 650066:D |
