B-47
•Processors are shipped with a dust cover (A) over the connector.
•There are two connectors on the CPU board for processors. If one
of these connectors is not being used, it will have a dust cover (B)
over the connector.
To remove these dust covers, follow the steps in Figure A–28.
AB
Toremove the dust cover on the proĆ
cessor module, grasp the cover and
pull the cover evenly.
Toremove the dust cover on the CPU
board, grasp the tab on the right side
of the cover and gently rock the covĆ
er back and forth while pulling it
gently up.
Install the processor module into the
connector by lining it up over the
connector and pressing firmly and
evenly.