Datacom Systems J Class Status of the EISA Slots

D-22
The eisa command lets you identify all EISA cards currently installed
on your workstation by showing you the current status of your
workstation’s four EISA slots. It is available only in the Information
Menu.
To use the eisa command, from the Information Menu of the boot
console interface, type:
Information Menu: Enter command > eisa Enter
The following table appears:
Slot # Slot State Device Information
––––––– –––––––––––– –––––––––––––––––––���
1 Empty Empty
2 Unconfigured HWP1850
3 Empty Empty
4 Configured INP0100
“Slot #” is the slot number as seen on the back of your workstation;
“Slot State” is the current state of any card in each slot; and “Device
Information” is the compressed EISA ID, read from the EISA card
itself.
Displaying the
Status of the
EISA Slots