D-18
Trying to change the monitor type on an empty slot, gives you this
warning message:
Configuration Menu: Enter command > monitor graphics2 Enter
MONITOR INFORMATION
WARNING: Intended graphics hardware does not exist.
Be sure to install the hardware after you power down the system.
Slot # HPA State Resolution Frequency Class
––––––––– –––––––––– ––––––– –––––––––– ––––––––– –––––––
graphics0 f8000000 Present 1024x1280 75Hz
graphics1 f4000000 Present Fixed
graphics2 f6000000 Empty
graphics3 fa000000 Present 1280x1024 72Hz
Current Console Path: core.RS232_.9600.8.none
Stable Store Console Path: GRAPHICS0