1-8
If you are using HP-UX 9.05, the recommended method of shutting
down your workstation is using the software command /etc/shut-
down.
If you are using HP-UX 10.0 or later, follow the instructions in Using
Your HP Workstation to shut down your workstation.
System Power LED
The Power Light Emitting Diode (LED) is located on the left side of
the front panel. It lights when the system unit power is on and flashes
until the OS is booted. Once the OS is booted, the LED remains on
without flashing.
Removable Device Buttons and LEDs
Depending on your configuration, you can have up to two (2) of the
following removable device drives:
•CD-ROM disc drive
•DDS tape drive
•Floppy diskette drive
NOTICE: You cannot have two of the same type of de-
vice. For example, you can have a CD-ROM
device and a floppy device, but not two CD-
ROMs.
A description of each drive’s controls and indicators is in the chapter
describing that device, later in this book.
Figure 1–3 shows the system unit with the removable device door
open. A removable device is in the top bay; a blank covers the empty
bottom bay.