Datacom Systems Inc
SPAN and Multi-Link Aggregators/Regenerators • USERguide
32
Unlike other solutions, the VERSAstreamMulti-Link Aggregator when deployed with
SINGLEstreamGigabit Aggregation Taps or other Datacom Systems Gigabit Ethernet taps
provides complete visibility into Gigabit EtherChannel, while allowing network professionals
to use their existing analysis and monitoring devices. The VERSAstreamMulti-Link
Aggregator is a simple "plug and play" solution that can combine data from multiple Gigabit
Ethernet network segments into one stream of data. Asingle Gigabit device, such as an intru-
sion detection system, protocol analyzer, or network probe can receive the aggregated data with
just one network interface card (NIC). It requires no software, no configuration, and no admin-
istration.
Application & Hardware Installation — Figure 23
through Figure 25 depict typical application installations of VERSAstreamMulti-
link aggregator/regenerator series models.
Gigabit Ether Channel Application — shown in Figure 23,
focuses on monitoring and analyzis of a Gigabit Ether Channel
Distribution Network.
This VS-1028 is similiar to other VERSAstreamMulti-link series installations:
Figure 23 - VS-1028 Gigabit EtherChannel Application