Datacom Systems VS series Multi-Link, SS series SPAN, VS series SPAN manual LED Display Code

20 Datacom Systems Inc

Figure 12 - VS-1082SX-SX Front Panel and functional diagram

An explanation of each front panel legend follows:

POWER: Two power supplies are provided for each module. Use of the second power supply is strongly recommended to assure uninterrupted monitoring. Furthermore, connecting the second power supply to a different external power source circuit than the first power supply eliminates power as a single point of failure. The POWER 1 and 2 LEDs illuminate indicating POWER 1 and 2, respectively, are on. Either LED not illuminated indicates a defective power source and immediate replacement is required to insure redundant power integrity.

NETWORK: These ports are either RJ45 or duplex-LC connectors used for connection to SPAN network connections. The LED Display Code table deciphers the RJ45 jacks with integrated LEDs that display line status and line speed of each port. The LED associated with each duplex-LC jack indicates when light signal has been detected on the respective Rx NETWORK port.

LED Display Code

Code

Link Data

Left LED

Solid Green

Flashing Green

WITH LINK OR DATA

Right LED

Green

Orange

OFF

Code

1,000 Mbs

100Mbs

10Mbs

SPAN and Multi-Link Aggregators/Regenerators • USERguide