Datacom Systems Inc
SPAN and Multi-Link Aggregators/Regenerators • USERguide
4
Compliance Testing
CAUTION:Changes or modifications to this unit not expressly approved by the party responsible for com-
pliance could void the user’s authority to operate the equipment.

Certifications

This equipment has been tested and found to meet the radiated and conducted emission limits for a Class
A product of EN 55022 to the EMC Directive 89/336/EEC requirements.
This equipment has been tested and found to meet the immunity levels for Class 1 tested to level 2 for
EN 6100-4-2, level 3 for EN 61000-4-3, level 1 for EN 61000-4-4, and level 3for EN 61000-4-5 to
the EN 50082-1 requirements and meets the Class A requirements for EN 61000-3-2 and EN 61000-3-
3.
This equipment has completed the Product Safety Review and found to meet the Low Voltage Directive
72/23/EEC (1993) requirements.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment gener-
ates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
CLASS 1 LASER PRODUCT
These explanatory labels are included in
the information for the user in accordance
with the requirements of IEC 60825-1.