Daxten DSR4020, DSR2020, DSR8020, DSR1020 manual To cancel Scan mode, Commands Dialog Box

Chapter 3: Local Port Operation 29

Figure 3.12: Commands Dialog Box

3.Select Scan Enable in the Commands dialog box.

4.Click X to close the Commands dialog box.

NOTE: Scanning will begin as soon as the Scan Enable button is selected.

To cancel Scan mode:

Select a target device if the OSCAR interface is open. -or-

Move the mouse or press any key on the keyboard if the OSCAR interface is not open. Scanning will stop at the currently selected target device.

-or-

If the OSCAR interface is not open, press Print Screen. The Main dialog box will appear.

a.Click Commands. The Commands dialog box appears.

b.Clear Scan Enable.