Clearing Forgotten Passwords

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.

1Follow the procedures in "Before You Begin" on page 55.

2To clear the password, remove the jumpers from pins 1 and 2.

3Replace the computer cover (see "Replacing the Computer Cover" on page 93).

4Connect your computer and monitor to electrical outlets, and turn them on.

5After the Microsoft® Windows® desktop appears on your computer, shut down the computer (see "Turning Off Your Computer" on page 55).

6Turn off the monitor and disconnect it from the electrical outlet.

7Disconnect the computer power cable from the electrical outlet, and press the power button to ground the system board.

8Remove the computer cover (see "Replacing the Computer Cover" on page 93).

9Locate the 3-pin password jumper (PSWD) on the system board (see page 107) and attach the jumper to pins 1 and 2 to re-enable the password feature.

10Replace the computer cover (see "Replacing the Computer Cover" on page 93).

Appendix

107

Page 107
Image 107
Dell 200 owner manual Clearing Forgotten Passwords, 107