Dell 200 owner manual Removing a CD/DVD Drive

5Gently slide the drive into place until you hear a click or feel the drive securely installed.

tabs (2)

hard drive

6Replace the computer cover (page 93).

NOTICE: To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer.

7Connect your computer and devices to electrical outlets, and turn them on.

See the documentation that came with the drive for instructions on installing any software required for drive operation.

CD/DVD Drive

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.

CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before opening the cover.

Removing a CD/DVD Drive

1Follow the procedures in "Before You Begin" on page 55.

NOTICE: Do not pull the drive out of the computer by the interface cable. Doing so may cause damage to cables and the cable connectors.

2Pull up on the drive release latch and slide the drive towards the back of the computer.

3Carefully, so as not to damage the attached interface cable, lift the drive away from the computer.

78

Removing and Installing Parts