w w w . d e l l . c o m s u p p o r t . d e l l . c o m
Figure 3-35. Scan Dialog Box
3The dialog box contains a listing of all the servers attached to your unit. Click to enable the check box next to the servers you wish to scan.
Press <Alt>+ the number of the server you wish to scan. You can select up to 16 servers.
4In the Scan Time box, type the number of seconds (from 3 to 99) of desired time before the scan moves to the next server in the sequence.
5Click OK.
To remove a server from the Scan list:
1In the Scan dialog box, click to disable the check box next to a server to be removed.
Click the Clear button to remove all servers from the Scan list
2Click OK.
To start the scan mode:
1Press <Print Screen>. The Main dialog box will appear.
2Click Commands. The Command dialog box appears.
54
Analog Port Operation
