Dell 3.7.0 manual Required components to generate

Type	Installation Option	Description
		and also remote report collection from
		this system.
2	DSET	Select this option to permanently install
		the required components to generate
		report from remote systems.
3	Remote Provider	Select this option to permanently install
		the required components to allow
		reports to be generated from a remote
		system against this system.

NOTE:

•For DSET application version 2.2 or lower, installation type 1 is displayed.

•If version 3.2 or later of 'DSET and Remote Provider', or 'DSET', or 'Remote Provider' is currently installed in the system, then installation types 1, 2, and 3 are displayed.

•For DSET application 3.5.1:

–If DSET is currently installed in the system, then installation type 3 is displayed.

–If Remote Provider is currently installed in the system, then installation type 2 is displayed.

3.Enter the <option number> to select the required installation type.

If the Install/Upgrade DSET and Remote Provider or Remote Provider option is selected, during installation the following messages are displayed:

a.If OpenPegaus is not running, the following message is displayed: The Small Footprint CIM Broker (SFCB) is a network service that enables remote collection of system configuration information. To perform the option that you selected, it is necessary to install and start this service and leave it running in background for future configuration collection. Continue installing/ activating the SFCB on this system to listen for incoming collection requests from clients. Do you want proceed[yn]?.

Enter y.

If SFCB is installed, the following message is displayed: DSET collects the Hardware data

via Common Information Model Object Model(CIMOM): sblim-sfcb, which is already present on this system, please wait while DSET validates the existing sblim-sfcb...

b.If OpenPegasus is running, the following message is displayed: DSET collects the Hardware

data via Common Information Model Object Model(CIMOM): tog-pegasus,which is already present on this system, please wait while DSET validates the existing tog-pegasus...

4.If CIMOM already exists, DSET validates the CIMOM in the following order:

a.Credential-less CIMOM authentication

b.If Credential-less CIMOM authentication is not successful, enter the root credentials of the system when the following message is displayed: Please enter "root" password:

Wait for the installation to complete. The following messages are displayed based on the selected installation type:

•If you selected the Install/Upgrade DSET and Remote Provider option, the following message is displayed: DSET installation completed successfully. Enter '/usr/

21