To perform the option that you selected, it is necessary to install and start this service and leave it running in background for future configuration collection.
Continue installing/activating the SFCB on this system to listen for incoming collection requests from clients. Do you want proceed[yn]?
5.Enter y.
If OpenPegasus is installed and running, the following message is displayed:
DSET collects the Hardware data via Common Information Model Object Model(CIMOM):
6.Enter the root credentials when the following message is displayed:
Please enter "root" password:
Wait for the installation to complete.
The DSET installation completed successfully message is displayed. DSET application is upgraded to version 3.7.0 and is installed at /opt/dell location by default.
Upgrading DSET Application Silently On Linux Operating System
To upgrade silently, run the command:
./dell/dset/lx(bit)/<version number>.bin
NOTE:
•If DSET application version 2.2 or lower is currently installed in the system and CIMOM services are not installed or running, then the application cannot be silently upgraded to version 3.7.0.
•For DSET application version 3.2 or later:
–If <full/collector/provider> parameter is provided in the command, then the currently installed DSET application is uninstalled completely and the specified component of version 3.7.0 is installed.
–If <full/collector/provider> parameter is not provided in the command, then the currently installed DSET application component is upgraded to version 3.7.0.
24
