
Keyboard Assembly
Removing the Keyboard
NOTICE: Disconnect the computer and any attached devices from electrical outlets, and remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.
NOTICE: Read "Preparing to Work Inside the Computer" before performing the following procedure.
1.Remove the hard drive.
2.Turn the computer over, and remove the five M2.5 x
1
M2.5 x
3.Turn the computer over and open the display.
NOTICE: The key caps on the keyboard are fragile, easily dislodged, and
4.Remove the center control cover:
a.Use a small,
b.Lift the center control cover up and away from the bottom case.
5.To release the keyboard from the palm rest, use a small,