4-4 Dell PowerVault 720N, 740N, and 760N Users Guide
5HVXOWV
After you finish configuring the filer, it is on-line. The following directories exist on the
filer:
/vol/vol0
/vol/vol0/home
NOTE: /volis not a directoryit is a special virtual root path under which the filer
mounts its volumes. You cannot mount /volto view all the volumes on the filer; you
must mount each filer volume separately.
If you purchased a license for the NFS protocol, /vol/vol0 is exported to the administra-
tion host for root access; /vol0/home is exported to the administration host for root
access and to all clients for general access.
If you purchased a license for the CIFS protocol, /vol/vol0 is shared as C$; only the
system administrator with the root password has read and write access to the C$
share. The /vol/vol0/home directory is shared as HOME without access granted to
anyone.
9HULI\LQJ1HWZRUN&RQQHFWLRQV

8VLQJWKHSLQJ&RPPDQG

After you configure the filer, you use the ping command from a client attached to the
network to verify that the filer can communicate with other computers on the
network.

3URFHGXUH

To verify filer communication, perform the following steps:
1. At a client attached to the network, enter the following command:
ping hostname-interface
Replace the variable hostname with the host name that you assigned to the filer
when you ran setup; replace the variable interface with one of the interface
names that the filer assigned when you ran setup.
2. Repeat the test once for each interface that is installed in the filer.

([DPSOHV

The following examples test the network connections for a filer that has the host
name filer with two interfaces named e0 and f0 installed:
ping filer-e0
ping filer-f0