& + $ 3 7 ( 5
&RQILJXULQJ+773RQWKH)LOHU
+773&RQILJXUDWLRQ,QIRUPDWLRQ
$ERXW7KLV&KDSWHU
This chapter contains instructions for configuring the filer to provide HTTP service. If you purchased a license for the HTTP protocol, follow the instructions in this chapter to configure the HTTP service; otherwise, continue with Chapter 7, "Setting Up passwd and group Files."
3UHUHTXLVLWHV
Before configuring the filer to provide HTTP service, you must decide which directory path that the filer uses as the home directory for files to be accessed by HTTP clients.
The path name for the directory uses the following format:
/vol/volume_name/directory_name
For example, to use the /home/html_files directory path on the vol0 volume, you use the following path:
/vol/vol0/home/html_files
3URFHGXUH
NOTE: All lines within filer configuration files must end with a carriage return.
To configure HTTP service, perform the following steps:
1.At the filer console, enter the following command to enable the HTTP daemon: options httpd.enable on
2.Use the following command syntax to specify the root of the path that HTTP requests can use:
options httpd.rootdir pathname
Configuring HTTP on the Filer
