Back to Contents Page

Memory

Dell™Optiplex™960MiniTower/Desktop/SmallFormFactorServiceManual
You can increase your computer memory by installing memory modules on the system board.
Your computer supports DDR2 memory. For additional information on the type of memory supported by your computer, see the appropriate specifications for
your system in this book.

DDR2 Memory Overview

lWhen installed in pairs, DDR2 memory modules should be of matched memory size and speed. If the DDR2 memory modules are not installed in matched
pairs, the computer will continue to operate, but with a slight reduction in performance. See the label on the upper-right or upper-left corner of the
module to determine the module's capacity.
The recommended memory configurations are:
¡A pair of matched memory modules installed in DIMM connectors 1 and 2
or
¡A pair of matched memory modules installed in DIMM connectors 1 and 2 and another matched pair installed in DIMM connectors 3 and 4
lIf you install mixed pairs of PC2-5300 (DDR2 667-MHz) and PC2-6400 (DDR2 800-MHz) memory, the modules function at the speed of the slowest
module installed.
lBe sure to install a single memory module in DIMM connector 1, the connector closest to the processor, before you install modules in any other
connector.
.

Addressing Memory Configurations

NOTE: Always install DDR2 memory modules in the order indicated on the system board.
NOTICE: Do not install ECC memory modules.
A
matched pair of modules in DIMM
connectors 1 and 2 (white
securing clips)
B
matched pair of memory modules in
DIMM connectors 3 and 4 (black
securing clips)
NOTE: Memory purchased from Dell is covered under your computer warranty.