8. If the primary hard drive is a 2.5-inch hard drive, it is mounted on the top (flat side) of a 2.5-inch hard drive caddy in the drive bay caddy. To remove the
primary drive:
a. Remove the 2.5-inch hard drive caddy from the drive bay caddy by gently bending out the release tabs on the side of the caddy and lifting out
the 2.5-inch hard drive caddy.
b. Remove the hard drive from the caddy by removing the four retaining screws, two on each side of the drive.

Replacing the Primary Hard Drive

1. Unpack the replacement hard drive and prepare it for installation. Use the documentation provided for the drive and configure it for your computer.
2. If you are installing a 3.5-inch hard drive, insert the hard drive into the drive bay caddy by gently bending out the release tabs on the side of the caddy,
and positioning the drive in the caddy. The pins inside the drive bay caddy should align with the screw holes on the side of the drive, and the connector
end of the drive should be toward the back of the computer.
3
drive bay caddy
1
2.5-inch hard drive and 2.5-inch hard drive caddy
2
release tabs (2)
3
drive bay caddy
1
2
2.5-inch hard drive caddy
NOTICE: To avoid damage to the drive, do not set it on a hard surface. Instead, set the drive on a surface, such as a foam pad, that will
sufficiently cushion it.
1
pin (2 on each side)
2
drive
3
release tabs (2)
4
drive bay caddy
5
front of drive bay caddy