Dell C500 manual Removing the Mini-PCI Card Assembly, Replacing the Mini-PCI Card Assembly

Removing and Replacing Parts : Dell Latitude C600/C500 Series Service Manual

Removing the Mini-PCI Card Assembly

NOTICE: Disconnect the computer and any attached devices from electrical outlets, and remove any installed batteries.

NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer.

NOTICE: Read "Preparing to Work Inside the Computer" before performing the following procedure.

1.Remove the memory module cover.

2.To release the mini-PCI card assembly from its socket, spread apart the metal securing tabs until the assembly pops up slightly.

3.Lift the mini-PCI card assembly out of its socket and disconnect any attached cables.

Replacing the Mini-PCI Card Assembly

NOTICE: The mini-PCI card must be inserted at a 45-degree angle to avoid damaging the connector.

NOTICE: The mini-PCI card is keyed, or designed to fit into its socket, in only one direction. Do not force the connection.

1.Align the mini-PCI card with the socket at a 45-degree angle, and press the mini-PCI card firmly into the socket.

file:///F/Service%20Manuals/Dell/Latitude/c500-600/remove.htm (7 of 40) [2/28/2004 7:53:33 AM]