Removing and Replacing Parts : Dell Latitude C600/C500 Series Service Manual
Keyboard Connector
8.Disconnect the keyboard flex cable from the interface connector on the system board assembly by pulling up on the connector.
NOTICE: Do not pull on the keyboard flex cable.
9. Remove the keyboard assembly from the bottom case assembly.
Replacing the Keyboard Assembly
1.Place the keyboard on the palmrest at the front of the computer with the keys face down and the connector toward the back of the computer.
NOTICE: To avoid damage to the connector pins, press the keyboard connector evenly into the interface connector, and do not reverse the keyboard connector.
2.Connect the keyboard flex cable to the interface connector on the system board assembly.
3.Carefully turn the keyboard over and fit the keyboard into place.
NOTICE: Position the keyboard flex cable so it is not pinched when you replace the keyboard in the bottom case assembly.
