Removing and Replacing Parts : Dell Latitude C600/C500 Series Service Manual

6.Remove the M2 x 4-mm screw that secures the display-feed flex cable to the display assembly through the black plastic flex cable retention bracket (see "12.1-Inch Display Assembly Bezel and Panel").

7.Lift up the right side of the display panel, and pull the panel out of the display-assembly top cover at an angle.

Replacing the Display-Assembly Top Cover

If you are replacing the display-assembly top cover, remove the support bracket.

1.Remove the two M2 x 4-mm screws on the left side of the

display-assembly top cover and the two M2 x 4-mm screws on the right side of the display- assembly top cover.

2.Lift the support bracket out of the display-assembly top cover.

Replacing the 12.1-Inch Display Panel

1.Place the left edge of the display panel against the left side of the support bracket in the display- assembly top cover, and elevate the right side of the panel with your hand.

2.Lay the display panel into the display-assembly top cover.

3.Reinstall the four M3 x 3-mm screws that secure the display panel to the support bracket.

Removing the Display-Feed Flex Cable (12.1-Inch Display Panel)

Display-Feed Flex Cable

file:///F/Service%20Manuals/Dell/Latitude/c500-600/remove.htm (19 of 40) [2/28/2004 7:53:33 AM]

Page 26
Image 26
Dell C500 manual Replacing the Display-Assembly Top Cover, Replacing the 12.1-Inch Display Panel