Dell C500 manual Replacing the System Board, System Board Assembly

Removing and Replacing Parts : Dell Latitude C600/C500 Series Service Manual

bottom case assembly. The fan guard is located on the right of the bottom case assembly.

System Board Assembly

11.Turn the bottom case assembly over and remove the M2.5 x 5-mm screw, which is identified by a white "circle B" and arrow on a red label attached to the top of the battery connector on the front center of the system board.

12.Remove the speakers from the bottom case assembly.

13.Pull the right side of bottom case assembly, next to the external headphone and microphone connectors, away from the system board assembly as you simultaneously lift the front of the system board assembly out and away from the bottom case assembly.

Replacing the System Board

1.Install the microprocessor on the replacement system board.

2.Connect the right and left speaker to the replacement system board.

3.Install the replacement system board.

a.Insert the external microphone and headphone connectors through the plastic bottom case assembly.

file:///F/Service%20Manuals/Dell/Latitude/c500-600/remove.htm (37 of 40) [2/28/2004 7:53:33 AM]