Removing and Replacing Parts : Dell Latitude C600/C500 Series Service Manual

2.Remove the keyboard assembly.

3.Remove the display assembly.

4.Remove the palmrest assembly.

5.Remove the thermal cooling assembly.

6.Remove the two M2.5 x 5-mm screws and one M2 x 3-mm screw that secure the hybrid cooling fan to the system board.

7.Disconnect the fan power cable from the system board interface connector and remove the hybrid cooling fan.

NOTE: The fan power cable is long, and can be pulled out from under the EMI shield to provide access to the connector.

NOTICE: Do not block the keyboard screw hole when reinserting the fan cable.

Microprocessor Module

Microprocessor Modules

NOTICE: Hold the microprocessor down while turning the cam screw to prevent intermittent contact between the cam screw and microprocessor.

file:///F/Service%20Manuals/Dell/Latitude/c500-600/remove.htm (29 of 40) [2/28/2004 7:53:33 AM]

Page 36
Image 36
Dell C500 manual Microprocessor Modules