not fully seated card

fully seated card

alignment guide

alignment bar

bracket within slot

bracket caught outside of slot

9If you replaced a card that was already installed in the computer and you removed the retention mechanism, you may reinstall the retention mechanism.

10Before replacing the card retention mechanism, ensure that:

The tops of all cards and filler brackets are flush with the alignment bar.

The notch in the top of the card or filler bracket fits around the alignment guide.

11Snap the card retention mechanism into place, securing the x16 PCI card.

Removing and Installing Parts

73

Page 73
Image 73
Dell C7565 manual Fully seated card