w w w . d e l l . c o m s u p p o r t . d e l l . c o m

Removing a Media Card Reader

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.

NOTICE: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your computer’s electronic components. You can do so by touching an unpainted metal surface on the computer chassis.

1Follow the procedures in "Before You Begin" on page 53.

2Lay the computer on its side so that the system board is on the bottom of the inside of the computer.

3Remove the computer cover (page 59).

4Remove the drive panel (see page 76).

cable

*Media Card Reader

*Not present on all computers.

5Disconnect the USB cable on the back of the Media Card Reader to the front panel USB connector on the system board (see page 61) and route the cable through the clip on the shroud.

90

Removing and Installing Parts

Page 90
Image 90
Dell C7565 manual Removing a Media Card Reader, Cable Media Card Reader Not present on all computers