power cable

data cable

6If you are installing a new floppy drive rather than replacing a drive, remove the drive-panel inserts (see page 85).

7Check all cable connections, and fold cables out of the way to provide airflow for the fan and cooling vents.

8Replace the drive panel (see page 78).

9Replace the computer cover (see page 99).

NOTICE: To connect a network cable, first plug the cable in to the network device and then plug it in to the computer.

10Connect your computer and devices to their electrical outlets, and turn them on.

See the documentation that came with the drive for instructions on installing any software required for drive operation.

11Enter system setup (see page 105) and select the appropriate Diskette Drive option.

12Verify that your computer works correctly by running the Dell Diagnostics (see page 46).

Media Card Reader

For information on using the Media Card Reader, see "Using a Media Card Reader (Optional)" on page 19.

Removing and Installing Parts

89

Page 89
Image 89
Dell C7565 manual Media Card Reader, Power cable Data cable