Removing and Installing Parts 85
5
Gently slide the new drive (second hard drive) into place until you hear a click or feel the
drive securely installed.
6
Connect a power cable to the drive.
7
Connect the data cable to the drive and to the system board (see page61).
Floppy Drive CAUTION: Before you begin any of the procedures in this section, follow the safety instructions
located in the Product Information Guide.
CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet
before removing the cover.
Follow the procedures in "Before You Begin" on page53.
NOTE: If you are adding a floppy drive, see "Installing a Floppy Drive" on page87.
Removing a Floppy Drive
1
Follow the procedures in "Before You Begin" on page53."
2
Remove the drive panel (see page76).
rail tabs (2)
primary hard drive
in upper bay
secondary hard
drive in lower bay
hard drive bay
C7565bk1.book Page 85 Wednesday, January 26, 2005 1:37 PM