5Insert the new battery into the socket with the side labeled "+" facing up, and snap the battery into place.

battery

battery socket

6Replace the computer cover (see page 99).

NOTICE: To connect a network cable, first plug the cable into the network device and then plug it into the computer.

7Connect your computer and devices to electrical outlets, and turn them on.

8Enter system setup (see page 105) and restore the settings you recorded in step 1.

9Properly dispose of the old battery. See the Product Information Guide for battery disposal information.

Replacing the Computer Cover

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.

1Ensure that all cables are connected, and fold cables out of the way.

Gently pull the power cables toward you so that they do not get caught underneath the drives.

2Ensure that no tools or extra parts are left inside the computer.

3Align the bottom of the cover with the tabs located along the bottom edge of the computer.

4Using the tabs as leverage, rotate the cover downward and close.

5Snap the cover into place by pulling back on the cover release latch, and then releasing the latch when the cover is seated.

Removing and Installing Parts

99

Page 99
Image 99
Dell C7565 manual Replacing the Computer Cover, Battery Battery socket