102 Removing and Installing Parts
4
Release the computer cover by pulling it away from the front of the
computer and lifting it up.
5
Set the cover aside in a secure location.

Removing the Support Bracket

CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
1
Follow the procedures in "Before You Begin" on page 99.
2
Remove the computer cover. See "Removing the Computer Cover" on
page 101.
3
Release the card retention bracket by lifting the card retention release
lever up.
4
Remove any cable which is secured in the support bracket cable clamp
from the cable clamp.
5
Pivot the support bracket and lift it off the hinge tabs.
1 computer cover 2 screws (2)
1
2