Processor
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.
Removing the Processor
1Follow the procedures in "Before You Begin" on page 99.
2Remove the computer cover (see "Removing the Computer Cover" on page 101).
CAUTION: Despite having a plastic shield, the heat sink assembly may be very hot during normal operation. Be sure that it has had sufficient time to cool before you touch it.
3Remove the processor fan/heat sink assembly from the computer (see "Removing the Processor Fan/Heat Sink Assembly" on page 150).
NOTICE: Unless a new heatsink is required for the new processor, reuse the original heat sink fan assembly when you replace the processor.
4At the processor, place your finger upon the hook end of the release lever, then push down and out to release it from the tab that secures it.
