1
2 
1 second hard drive (optional) | 2 | shoulder screws (4) |
6Connect the power and data cables to the drive.
7Connect the data cable to the system board.
8Slide the hard drive into the hard drive bay until it snaps in place.
9Check all cables to be certain that they are properly connected and firmly seated.
10Replace the support bracket (see "Replacing the Support Bracket" on page 161).
11Replace the computer cover (see "Replacing the Computer Cover" on page 162).
NOTICE: To connect a network cable, first plug the cable into the network port or device and then plug it into the computer.
12Connect your computer and devices to electrical outlets, and then turn them on.
13See the documentation that came with the drive for instructions on installing any software required for drive operation.
14Check the system setup for drive configuration changes (see "Entering System Setup" on page 170).
130
