![](/images/new-backgrounds/1264364/26436457x1.webp)
1 | drive | 2 | |
|
|
|
|
4. Align the hard drive bracket with the guides in the hard drive bay.
1 | 2 | hard drive | 3 | guide in | |
|
|
|
|
|
|
5.Gently slide the drive into place until you feel a click or the drive is securely installed. Take care not to let the drive
6.Connect the power and
1 | serial ATA data cable | 2 | power cable |
|
|
|
|
7.Check all cables to be certain that they are properly connected and firmly seated.
8.Replace the computer cover (see Installing the Computer Cover).
NOTICE: To connect a network cable, first plug the cable into the network port or device and then plug it into the computer.
9.Connect your computer and devices to electrical outlets, and then turn them on.
See the documentation that came with the drive for instructions on installing any software required for drive operation.
10.Check the System Setup for drive configuration changes (see Entering System Setup).