Connecting to a Projector
You can connect the device to a projector using a VGA cable.
NOTE: The VGA option is available only with the VGA model of the device. The VGA cable will not ship with your device unless you order it.
NOTE: You need to install the Viewer program from the CD for the device to detect the projector. To configure the program, see the Help section in
the program.
To connect the device to the projector, connect the sync connector on the VGA cable to the device, and then connect the other connector of the VGA cable to the projector cable. Run the Viewer program for the device to detect the projector.
Using Cards
Your device has two slots located on the top of the unit. The larger slot supports CompactFlash Type II cards. The smaller slot supports Secure Digital (SD) memory cards, Secure Digital I/O (SDIO) cards, and the MultiMediaCard (MMC). All three memory card types are available in sizes from 64 MB to 1 GB or 2 GB.
CompactFlash Cards
Your device supports CompactFlash Type II cards. Some common types of cards include:
•Modem — Connect a telephone line for modem data communication.
•Wireless communication — Data communication without the use of cable connections. You can use cards, such as internal cards with Bluetooth wireless technology and 802.11b wireless LAN.
•Storage — Save data or install programs on a storage card.
Operating the Axim
61
