Dell I1200, I2200 specs

1M2.5 x 5-mm screws (4)

2shield retention tabs (3)

3shield-retention tab slots

6.Disconnect the attached antenna cable from the Mini PCI card.

1antenna cable

2metal securing tabs (2)

3Mini PCI card connector

4Mini PCI card

7.Close the display.

8.From the bottom of the computer, remove the two M2.5 x 5-mm screws labeled "D."

Image 13

Dell I1200, I2200 manual

Contents

Model PP10S June 2005 Rev. A01 Base Plastics Recommended Tools Before You BeginTurning Off Your Computer Before Working Inside Your Computer Turn off your computer Computer Orientation Screw Identification Back to Contents Flashing the Bios From a Floppy Disk or a CD Flashing the BiosFlashing the Bios From the Hard Drive Back to Contents Remove the display assembly Remove the Mini PCI card Coin-Cell Battery Removing the Microprocessor Module Microprocessor Module Replace the microprocessor thermal-cooling assembly Installing the Microprocessor Module Display Display AssemblyPage Page Display Panel Display BezelRemoving the Display Panel Installing the Display Panel Hard Drive Installing the Hard DriveRemoving the Hard Drive Back to Contents Removing the Keyboard Keyboard Installing the Keyboard Palm Rest Back to Contents USB Connector Pinout Assignments for I/O ConnectorsVideo Connector Removing the Speakers Speakers Installing the Speakers Removing the System Board System BoardPage Installing the System Board Replace the display assembly System Components Removing the Cooling Fan Microprocessor Thermal-Cooling Assembly Installing the Cooling Fan Removing the Microprocessor Thermal-Cooling Assembly Page Installing the Microprocessor Thermal-Cooling Assembly Model PP10S June 2005 Rev. A01 Memory Memory, Optical Drive, Modem, and Mini PCI CardRemoving the Memory Module Optical Drive Installing the Memory ModulesRemoving the Optical Drive Modem Installing the Optical DriveRemoving the Modem Page Mini PCI Card Installing the ModemRemoving the Mini PCI Card Page Installing the Mini PCI Card Page Back to Contents