1M2.5 x 5-mm screws (4)

2shield retention tabs (3)

3shield-retention tab slots

6.Disconnect the two M2 x 3-mm screws and the fan power cable from the system board.

.

1M2 x 3-mm screws (2)

2fan connector

7.Hold the fan by the plastic housing at an angle to lift it out of the system board.

Installing the Cooling Fan

1.Align the cooling fan with the microprocessor thermal-cooling assembly on the system board.

2.Replace the two M2 x 3-mm screws and connect the fan connector to the system board.

Page 32
Image 32
Dell I2200, I1200 manual Installing the Cooling Fan