Dell I1200, I2200 manual Removing the Microprocessor Thermal-Cooling Assembly

.

1M2 x 3-mm screws (2)

2fan connector

3.Align the EMI shield retention tabs with the retention-tab slots on the computer base and rotate the front until it lies flat.

4.Replace the four M2.5 x 5-mm screws that secure it to the system board.

1M2.5 x 5-mm screws (4)

2shield retention tabs (3)

3shield-retention tab slots

1 M2.5 x 5-mm screws (4)

Removing the Microprocessor Thermal-Cooling Assembly

CAUTION: Before performing the following procedures, read the safety instructions in the Product Information Guide.

CAUTION: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your computer's electronic components. You can do so by touching an unpainted metal surface.