Manuals / Dell / Computer Equipment / Computer Hardware

Dell I2200, I1200 manual

Models: I1200 I2200

1 45

Download 45 pages 19.37 Kb

Page 40

1hinge cover

2notched edge

3.Open the display all the way (180 degrees) so that it lies flat against your work surface.

4.Use a small plastic scribe to lift the right edge of the hinge cover.

5.Lift the hinge cover away from the hinges and computer base.

1hinge cover

2notched edge

NOTICE: The keycaps on the keyboard are fragile, easily dislodged, and time-consuming to replace. Be careful when removing and handling the keyboard.

NOTICE: When lifting the keyboard, be careful not to pull the keyboard connection out of the system board.

6.Lift and turn the keyboard over and lay it across the palm rest over the touch pad.

7.Remove the M2 x 3-mm screw securing the modem to the system board, and set it aside.

8.Remove the captive screw from the modem.

9.Pull straight up on the attached pull-tab to lift the modem out of its connector on the system board and disconnect the modem cable.

Image 40

Dell I2200, I1200 manual

Contents

Model PP10S June 2005 Rev. A01 Base Plastics Before You Begin Recommended ToolsTurning Off Your Computer Before Working Inside Your ComputerComputer Orientation Turn off your computerScrew Identification Back to Contents Flashing the Bios From a Floppy Disk or a CD Flashing the BiosFlashing the Bios From the Hard Drive Back to Contents Coin-Cell Battery Remove the display assembly Remove the Mini PCI cardMicroprocessor Module Removing the Microprocessor ModuleInstalling the Microprocessor Module Replace the microprocessor thermal-cooling assemblyDisplay Assembly DisplayPage Page Display Panel Display BezelRemoving the Display Panel Installing the Display Panel Hard Drive Installing the Hard DriveRemoving the Hard Drive Back to Contents Keyboard Removing the KeyboardInstalling the Keyboard Palm Rest Back to Contents USB Connector Pinout Assignments for I/O ConnectorsVideo Connector Speakers Removing the SpeakersInstalling the Speakers System Board Removing the System BoardPage Installing the System Board Replace the display assembly System Components Microprocessor Thermal-Cooling Assembly Removing the Cooling FanInstalling the Cooling Fan Removing the Microprocessor Thermal-Cooling Assembly Page Installing the Microprocessor Thermal-Cooling Assembly Model PP10S June 2005 Rev. A01 Memory Memory, Optical Drive, Modem, and Mini PCI CardRemoving the Memory Module Optical Drive Installing the Memory ModulesRemoving the Optical Drive Modem Installing the Optical DriveRemoving the Modem Page Mini PCI Card Installing the ModemRemoving the Mini PCI Card Page Installing the Mini PCI Card Page Back to Contents