Inverter Board

power/ suspend indicator

H16

H15

(screws H15 and H16 are 3 mm)

3 mm

.

inverter board

Figure 4-21. Inverter Board Removal

To remove the inverter board, follow these steps:

1.Remove the front bezel.

See “Front Bezel” found earlier in this section.

2.Remove the LCD panel.

See the previous subsection, “LCD Panel.”

3.Disconnect the power/suspend indicator connector.

4.Remove inverter board screws H15 and H16.

5.Remove the inverter board from the back bezel.

Microphone

The microphone cannot be removed separately; it is part of the inverter board.

4-26 Dell Latitude LM Systems Service Manual

Page 62
Image 62
Dell LM P-133ST manual Inverter Board, Microphone