Dell LM P-133ST manual Touch Pad, Remove the touch pad buttons

Touch Pad

button (2)

touch pad

touch pad bracket

(screws S11– S15 are 3 mm)

3 mm

S11

top assembly

touch-pad cable connector

S14 S15

flex cable

S12	touch-pad
	button board
	S13

Figure 4-31. Touch Pad Removal

To remove the touch pad, follow these steps:

1.Remove the top assembly and turn it over. See “Top Assembly” found earlier in this section.

2.Remove touch pad screws S11, S12, and S13.

Place the touch-pad button board to one side. The board has a flex cable that attaches to the touch pad.

3.Remove the touch pad buttons.

Press down on the touch-pad button projections, and pull the touch pad but- ton out of the recess on the front of the top assembly.

4.Remove touch-pad bracket screws S14 and S15. Remove the touch pad bracket.

5.Remove the touch pad bracket and touch pad from the top assembly.

4-38 Dell Latitude LM Systems Service Manual