Dell LM P-133ST manual Remove the keyboard from the computer

4.Remove heat sink screws S3 and S4. Lift off the heat sink.

CAUTION: Lift away the heat sink gently. Rough handling could damage the thermal pad on the bottom of the heat sink.

5.Disconnect the keyboard cable from the main board.

Use a small flat-blade screwdriver to release the ZIF connector securing the keyboard cable.

CAUTION: Lift away the cable only after the ZIF connector is opened (see “ZIF Connectors” found earlier in this chapter). Pulling the cable from the connector damages the conductive coating on the end of the cable.

6. Remove the keyboard from the computer.

Removing and Replacing Parts 4-31