Dell PP29L owner manual Troubleshooting

5At the Welcome Dell System Owner screen, click Next.

NOTE: The Drivers and Utilities program displays drivers only for hardware that came installed in your computer. If you installed additional hardware, the drivers for the new hardware might not be displayed. If those drivers are not displayed, exit the Drivers and Utilities program. For drivers information, see the documentation that came with the device.

A message stating that the Drivers and Utilities program is detecting hardware in your computer appears.

The drivers that are used by your computer are automatically displayed in the My Drivers—The ResourceCD has identified these components in your system window.

6Click the driver that you want to reinstall and follow the instructions on the screen.

If a particular driver is not listed, then that driver is not required by your operating system.

Manually Reinstalling Drivers

NOTE: If your computer has a Consumer IR port and you are reinstalling a Consumer IR driver, you must first enable the Consumer IR port in the system setup program (see "Using the System Setup Program" on page 141) before continuing with the driver installation (see "Reinstalling Drivers and Utilities" on page 100). For information about components installed on your computer, see "Front View" on page 19.

After extracting the driver files to your hard drive, as described in the previous section:

1Click Start→My Computer→Properties→Hardware→Device Manager.

2Double-click the type of device for which you are installing the driver (for example, Audio or Video).

3Double-click the name of the device for which you are installing the driver.

4Click the Driver tab→Update Driver.

5Click Install from a list or specific location (Advanced)→Next.

6Click Browse and browse to the location to which you previously copied the driver files.

7When the name of the appropriate driver appears, click Next.

8Click Finish and restart your computer.

102

Troubleshooting