Dell PP29L owner manual Start Button and Connect To Option

Models: PP29L

1 170
Download 170 pages 57.17 Kb
Page 69
Image 69

Start Button and Connect To Option

Click Start→Connect To→Show all connections.

NOTE: If your computer is set to the Classic Start menu option, click StartSettingsNetwork Connections to view your network connections.

If Wireless Network Connection does not appear under LAN or High-Speed Internet, you may not have a wireless network card.

If Wireless Network Connection appears, you have a wireless network card. To view detailed information about the wireless network card:

1Right-click Wireless Network Connection.

2Click Properties.

The Wireless Network Connection Properties window appears.

The wireless network card’s name and model number are listed on the General tab.

NOTE: If Wireless Network Connection does not appear, you may not have a wireless network card.

The Order Confirmation for Your Computer

The order confirmation that you received when you ordered your computer lists the hardware and software that shipped with your computer.

Setting Up a New WLAN Using a Wireless Router and a Broadband Modem

1Contact your Internet service provider (ISP) to obtain specific information about the connection requirements for your broadband modem.

2Ensure that you have wired Internet access through your broadband modem before you attempt to set up a wireless Internet connection (see "Connecting a Network or Broadband Modem Cable" on page 67).

3Install any software required for your wireless router. Your wireless router may have been shipped with installation media. Installation media usually contains installation and troubleshooting information. Install the required software according to the instructions provided by the router manufacturer.

4Shut down your computer and any other wireless-enabled computers in the vicinity.

5Disconnect your broadband modem power cable from the electrical outlet.

Setting Up and Using Networks

69

Page 69
Image 69
Dell PP29L owner manual Start Button and Connect To Option