Option | Description | |
|
| |
Strong Password | Enable strong password - This option is disabled by default. | |
Password Configuration | This field controls the minimum and maximum number of characters | |
| allowed for the admin and system passwords. Changes to these fields are | |
| not active until they are committed via the apply button or saving changes | |
| before exiting setup. | |
| • | Admin Password Min |
| • | Admin Password Max |
| • | System Password Min |
| • | System Password Max |
Password Bypass | This option lets you bypass the system (Boot) Password and the internal | |
| HDD password prompts during a system restart. | |
| • | Disabled |
| • Reboot Bypass (Default Enabled) | |
Password Change | Allows you to determine whether changes to the system and hard disk | |
| passwords are permitted when an administrator password is set. | |
| • Allow | |
This option lets you determine whether changes to the setup options are | ||
Changes | permitted when an administrator password is set. | |
| • Allow Wireless Switch Changes (Default) | |
TPM Security | This option lets you control whether the Trusted Platform Module (TPM) in | |
| the system is enabled and visible to the operating system. | |
| TPM Security (Default) | |
| • | TPM ACPI Support |
| • | Deactivate |
| • | Activate |
|
| NOTE: Activation, deactivation, and clear options are not affected if |
|
| you load the setup program's default values. Changes to this option |
|
| take effect immediately. |
PTT Security | Allows you to enable or disable PTT Support. | |
| • | PTT Security (Default) |
| • | Revoke Trust (Default) |
Computrace (R) | This field lets you activate / | |
| interface of the optional Computrace Service from Absolute Software. | |
| • | Deactivate (Default) |
| • | Disable |
| • | Activate |
CPU XD Support | This option enables or disables the Execute Disable mode of the | |
| Processor. |
46