40 Set up for local printing
www.dell.com/supplies | support.dell.com
Using Windows 2000
When you attached the cable and turned on the printer and computer, the Found New
Hardware Wizard sc reen appeared on your compu ter screen.
1Insert the Drivers and Utilities CD, and then click Next.
2Select Search for a suitable driver, and then click Next.
3Select Specify a location only, and then click Next.
4Browse to the location of the printer driver on the Drivers and Utilities CD.
D:\Drivers\Win_2000\
Replace D:\ with the letter of your CD-ROM drive (for example, type D:\ where D is
the drive letter of your CD).
5Click Open, and then click OK.
6Click Next to install the driver that is displayed.
D:\Drivers\Win_2000\dkaag1da.inf
7Click Finish when the software is installed.
8When the Dell Drivers and Utilities screen appears, choose Install the printer for Use
on this Computer only (Personal Installation) to install the additional software for
your printer.
9If the Drivers and Utilities CD does not automatically launch, click Start →Run and
browse your CD drive (for example, type D:\ where D is the drive letter of your CD).
Select SETUP.EXE, and then click OK.
When all the files are installed on your computer, the Congratulations screen appears.
10 Click Print a Te st Pa ge to verify printer setup.
11 Click Finish when the test page prints successfully.
12 Click Exit on the Drivers and UtilitiesCD screen.