w w w . d e l l . c o m / s u p p l i e s s u p p o r t . d e l l . c o m
Replacing the shield
Follow these steps to reattach the shield and close the doors.
CAUTION: Before performing any of the procedures listed below, read and follow the safety instructions.
1Grasp the shield by the tabs and align the three keyholes on the shield with the top three screws. Holding the shield by the tabs, slide it down onto the screws. Tighten all six screws.
2Close the side door.
3Close the upper door and the lower door.
4Plug in the power cord and turn on the printer.
36
